NETZSCH - Leading Thermal Analysis.
ServiceProductsContract Testing Methods
 

STA 429 CD - Simultaneous TG-DTA up to 2400°C

Unrivaled high-temperature TG and DTA performance up to 2400°C with tungsten furnace

 

 

STA 429 CD - Technical Specifications (subject to change)

  • Temperature range: -160°C ... 2400°C
  • Heating and cooling rates: 0.01 K/min ... 100 K/min (dependent on furnace)
  • Weighing range: 15000 mg
  • Resolution: 5 µg
  • Atmospheres: inert, oxidizing, reducing, corrosive (to be discussed), static, dynamic
  • Integrated gas flow control for 2 gas channels
  • Analogous pressure display
  • Mass flow controller for 2 purge gases and 1 protective gas (optional)
  • High vacuum-tight assembly up to 10-5 mbar (10-3 Pa)
  • c-DTA® for the calculated DTA-signal, ideal for temperature calibration at pure TG applications
  • TG-DSC and TG-DTA sample carrier for real simultaneous operation
  • Coupling to FTIR, MS and GC-MS over a heatable adapter (option)
  • Extension with unique PulseTA® system (option)
  • Skimmer coupling for mass spectrometer at electrical lifting device (1450°C or 2000°C) (option)
  • Water-cooled highest-temperature furnace up to 2400°C with tungsten heater, high vacuum recipient and turbo molecular pump at lateral electrical lifting device (option)
sta429
blind
Schematic of STA 429 CD with highest temperature tungsten furnace

 

Please also visit the following product pages:

 

QMS 403 C Aëolos®

QMS 403 C Aëolos®


blind

NETZSCH offers instruments for thermal analysis, thermal properties measurement, thermal hazard screening, and contract testing services. Our portfolio is the world's broadest, including a full range of dilatometers to measure high accuracy thermal expansion, classical DSC & TGA, high temperature DSC to 1650°C for specific heat, very high temperature STA (TGA-DSC/DTA) from sub-ambient to 2400°, thermal / evolved gas analysis with fully-integrated FTIR & MS, high resolution TMA and DMA, plus DEA - dielectric analysis for thermoset cure monitoring. We also feature leading-edge technology for thermal conductivity by guarded hot plate and heat flow meters, laser flash thermal diffusivity measurement, thermal hazard screening via adiabatic reaction calorimetry, as well as refractories testing including HMOR, CIC, and RUL. Finally, we offer advanced software packages including thermokinetics for process modeling and development.

Information Request Form
Home  Methods  Products  Service 

NETZSCH Group


Last update: 04/22/2009 , Copyright © 2000-2006 NETZSCH-Geraetebau GmbH